ChipProg-ISP - universal in-system programmer for engineering and manufacturing

• Supports in-system programming for a variety of embedded microcontrollers, serial EEPROM & flash memory devices
• Palm size tool - 4"x2½"x1" (100x70x25 mm)
• Communicate to a PC via a USB 2.0 compatible port
• Any number of concurrently working ChipProg-ISP chip burners can be driven from one computer or via a USB active hub
• Does not require an additional power adapter for the programming - the power is taken from the computer USB port
• Has a standard 14-pin connector for plugging changeable ISP cables connecting to the target
• The output connector is protected against incorrect connection to the target
• Being based on four independently working 32-bit microcontrollers and FPGAs, provides very fast loading & programming
• Works under control of Windows XP and Windows 7 32- and 64-bit versions. Easy-to-use and intuitive user interface
• Allows to work in a multi-programmer mode - unlimited number of ChipProg-ISP units can be driven from one computer
• 'Start' button for fast manual operations programmable to execute a single operation or a batch of them
• Vpp and other parameters precise adjustment via the software settings
• Project management - you can create, open and store an unlimited number of projects in the programmer software shell
• Supports loading files of all popular formats: Intel HEX, Binary, Motorola S-format, POF, JEDEC, PRG, ASCII Hex & Octal, etc.
• Built-in editor supports sophisticated operations with blocks
• Splits files to multiple images
• Embedded script language for automation of routine operations
• Serialization of the programmed devices by writing a serial number into a specified target memory location
• Calculation of the control sum with capability to write it into a specified target memory location
• A unique signature can be written into a specified target memory location
• Advanced self-diagnostic start-up routine that check the target device reliable contact through the ISP programming cable
• Incorrect device connection check and overcurrent protection
• Lifetime free software updates via Web
• Palm size tool - 4"x2½"x1" (100x70x25 mm)

Download the ChipProgUSB software, universal for all Phyton USB-hosted ChipProg programmers, to evaluate it in a demo mode without the hardware.