ChipProg-G4 universal gang programmer for manufacturing

• Based on four concurrently working Phyton ChipProg-48 programmers
• Supports parallel & serial EPROM & EEPROM; microcontrollers, and PAL/PALCE/GAL/PEEL/PLD devices
• Programs all DIP-packed device from 6 to 48 pin via 48-pin pin ZIF DIP sockets - no additional adapters are required
• Optional adapters for programming devices in PLCC, SOIC, SSOP, QFP, BGA, QFN, SON and other packages are available
• Provides very fast operations - programs a 64 MBit NOR flash memory device for less than 50 sec
• Supports in-system programming for the devices allowing the ISP (ICP) mode via special cables-adapters
• Communicate to a PC via a single USB 2.0 compatible port
• Being based on four independently working 32-bit microcontrollers and FPGAs, provides very fast loading & programming
• Each site has its own 'Start' button for fast manual operations programmable to execute a single operation or a batch of them
• Works under control of Windows 9x/2000/NT/XP/Vista. Easy-to-use and intuitive user interface
• Supports loading files of all popular formats: Intel HEX, Binary, Motorola S-format, POF, JEDEC, PRG, ASCII Hex & Octal, etc.
• Built-in editor supports sophisticated operations with blocks
• Vpp and other parameters precise adjustment via the software settings
• Splits files to multiple images
• Embedded script language for automation of routine operations
• Serialization of the programmed devices by writing a serial number into a specified target memory location
• Calculation of the control sum with capability to write it into a specified target memory location
• A unique signature can be written into a specified target memory location
• Advanced self-diagnostic start-up routine that check the target device reliable contact in the programming socket
• Incorrect device insertion check and overcurrent protection; automatically detects bad contacts before starting any operation
• Lifetime free software updates via Web
• Has a built-in universal 110-240VAC power adapter; US, European, UK and Australian power cables are available
• Dimensions: 435x175x45 mm (17x7x1¾ inch)
• See also other multi-programming solutions based on ChipProg-4x and ChipProg-ISP tools

Download the ChipProgUSB software, universal for all Phyton USB-hosted ChipProg programmers, to evaluate it in a demo mode without the hardware.